- HOME
- >
- PRODUCTS【HEAD & FORK】
- >
- C-448
C-448
HEAD CUP PRESS
The C-448 is new tool for head-cup press, easy & safety maintenance.
The upper piece consist of the handle, shaft and upper step-ring.
The lower piece step-ring is detachable, so it makes easy and quick work surely.
If you turn the handle counter clockwise too much, C-448's handle stays at the top, it will not come off. It has integrated bearing type.
You can work with long head-tube over 300mm using C-449 extension.
| O.A.L. | 380mm～420mm |
|---|---|
| Weight | 1.9kg |
Caution：Don't work with such head-set as a pre-installed bearing type.
■Replacement parts
■Optional parts
C-448-4
ADAPTER SET
Using C-448-4 enable present C-448 to comply with headset such as ChrisKing, Zerostack, Onepointfive and Headshok.
Still features easy operatability of C-448 because adapters are instantly stops by gasket inside.
| Applicable size | 1", 1-1/8", 1.5", 1.5"（1-1/8" conversion） |
|---|---|
| Outer diameter size | 50mmφ（1"） 52mmφ（1-1/8"） 65mmφ（1.5"） |
C-448+C-448-4
C-449
EXTENSION
For long head-tube （220 to 350mm）
C-448+C-449+C-200